Superfatting is a commonly used but much misunderstood soapmaking technique. Most lye calculators
will figure this for you automatically, but here's an explanation of just why
you should do it.
Time Required: None-Just an adjustment to your recipe
- Superfatting (sometimes referred to as a lye discount) is either adding an extra amount of oil into your soap recipe but keeping the lye amount the same, or using the same amount of oil and less lye. For example, using 9.5 ounces of lye instead of 10 ounces would amount to 5% superfatting. (5% extra oil). (5% superfatting is actually a fairly standard percentage amongst most soap makers. It's what I generally use...)
- There are two reasons to do this:
A small amount of extra "free" oil in the soap adds extra moisturizing qualities to the soap. You will hear this sometimes referred to as "emollient" qualities. Basically, it makes the soap more moisturizing.
- It also gives you a bit of a "fudge factor". Having extra lye in your soap is a big problem...much bigger than having extra oil.
Additionally, many oils will vary slightly in their their true SAP (Saponification value). Superfatting builds in some safety if your scale is not completely precise. Having a little extra oil in the recipe assures that every one of the lye molecules will have more than enough opportunity to pair up with an oil molecule.
- The thing you need to watch out for with superfatting is that while soap doesn't spoil quickly, oil does. The more "free" oil you have in your soap, the more likely you are to have spoilage, or what is often called DOS or Dreaded Orange Spots, which are small orange spots where a pocket of free oil has gone bad.
- Superfatting your soap is easy...indeed, most lye calculators will calculate it for you. If not, you can just figure your lye, and then 'discount' it by your percentage. For example, if your recipe calls for 10 ounces of lye and you want a 5% discount, multiply that by .95 (95%). That would give you 9.5 ounces of lye. Make the soap as you otherwise would.
- Once you have a recipe you like, you may also want to experiment with a higher or lower superfat percentage. Try a batch at 3% and try a batch at 10%.
- Some soapmakers, like Susan Miller Cavitch in The Soap Maker's Companion suggest upwards of 10-15% superfatting! I think this is way too much! Soap with this much extra oil, while moisturizing, is very prone to spoilage.
- Some people and/or recipes will suggest holding out your most luxurious oils or butters to add in at trace as the "superfat" oils. I've never seen any concrete tests or data on this - but I don't think it's worth the trouble.
What You Need
- A Soap Recipe
- A Lye Calculator